|
Product Details:
|
| Material: | Aluminium Or Copper | Engine Make: | TOYOTA |
|---|---|---|---|
| Package: | Cartons, Plastic Bags, Neutral Or Customized | Type: | Engine MAIN Bearing |
| Pieces: | 2 P | Oem No.: | T715A |
| Thickness: | 2.5 Mm | Other OE: | T9100A |
| Highlight: | 1NZ-FE Crankshaft Main Bearing,2NZ-FE Crankshaft Main Bearing,11791-22020 |
||
1NZ-FE 2NZ-FE Thrust Washer T715A 11791-22020 2.5mm For TOYOTA High Precision
Product Specification
| Model | 1NZ-FE 2NZ-FE Thrust Washer T715A 11791-22020 2.5mm For TOYOTA High Precision |
| Specification | STD 0.25 |
| Brand | TAJHO |
| Weight | 0.79 kg/PC |
| Material | Aluminium Aloy |
| Product name | thrust washer |
| Refer to | M723A1 |
| Quality | ISO 9001:2008 ISO/TS16949 standard |
| Precision | 0.03MM |
| HS CODE | 8409999990 |
| Service | OEM available |
Note
When installing the thrust plate, ensure that there is a suitable fit gap between the thrust plate and the outer diameter of the bearing hole or shaft. Excessive or small fit gaps can affect the normal operation and lifespan of the thrust plate. Follow the guidance or technical specifications provided by the equipment manufacturer for correct installation.
Product Technology
The performance of thrust pads largely depends on the properties of the selected material. Commonly used thrust plate materials include steel, stainless steel, copper, aluminum alloy, etc. Select materials with good strength, corrosion resistance, and wear resistance according to specific application requirements.
Select appropriate materials based on design requirements and application needs. Common thrust plate materials include steel, stainless steel, copper, aluminum alloy, etc. Ensure that the selected materials comply with relevant standards and requirements.
We need to regularly inspect and maintain the condition and performance of the thrust pads. If wear, cracks, or other damage is found, the thrust plate should be replaced in a timely manner to ensure the normal operation of the equipment.
Thrust plates are usually installed at both ends of bearings or other axially moving components to provide support and fixation functions. They can be installed inside or outside the bearing, or between the shaft and the bearing.
Contact Person: Mrs. Amy
Tel: +8615018713561
Fax: 86-577-65987379
