|
Product Details:
|
| Package: | Cartons | Car Make: | Fiat |
|---|---|---|---|
| Oem No.: | 8030.02 | DIA.: | 100.0mm |
| Thickness:: | 100.0mm 2.5+2.5+4 | No.cyl: | 3 |
| Type: | PISTON RING | Size: | Standard Size |
High Standardly Piston Ring 8030.02 616 For Fiat 100.0mm 2.5+2.5+4
| Model | High Standardly Piston Ring 8030.02 616 For Fiat 100.0mm 2.5+2.5+4 |
| DIA. | 100.0mm |
| SIZE | 2.5+2.5+4 |
| Application | PISTON RING |
| Quality | ISO 9001:2008 ISO/TS16949 standard |
| Precision | 0.003mm |
| Service | OEM available |
Product Characteristics
Product Operation
Confirm replacement requirements: When the piston ring is damaged, worn, or fails, it needs to be replaced. Usually, the replacement of piston rings is carried out during engine overhaul or maintenance.
Disassembling old piston rings: Use special tools and methods to gently remove the old piston rings and ensure that they do not damage the surface of the piston or cylinder liner.
Note
Pay attention to the condition of the piston rings: Before installing or replacing the piston rings, carefully inspect them for damage, deformation, or wear. If any problems are found, the piston rings should be replaced with new ones in a timely manner.
Uniform force application: When using installation tools to install piston rings, it is necessary to apply force evenly and ensure that the piston rings are evenly installed in the piston groove to avoid damaging the piston rings or causing poor sealing.
The product principles of piston rings include sealing principle, lubrication principle, guiding principle, heat dissipation principle, and the function of preventing impurities from entering. These principles together ensure the efficient operation, reliability, and durability of the engine and compressor. By optimizing the design and manufacturing process of piston rings, the performance and lifespan of products can be improved.
The piston ring also has the function of guiding the piston to move on the cylinder wall, ensuring the stability and accuracy of the piston. Through close contact with the cylinder wall, the piston ring limits the axial and radial displacement of the piston, preventing it from deviating from its normal motion trajectory.
The piston rings also perform lubrication functions. During operation, a small lubricating oil film is formed between the piston ring and the cylinder wall to reduce friction and wear. This helps to reduce energy consumption, extend piston ring life, and improve the efficiency of the engine or compressor
The piston ring is used to seal the gap between the piston and the cylinder block to prevent leakage of lubricating oil and combustion chamber gas. High quality piston rings can provide excellent sealing performance, ensuring the normal operation of the engine or compressor, and minimizing energy loss and environmental pollution
The piston ring is generally composed of several rings, closely connected on both sides. Common structures include oil rings, oil control rings, and upper and lower spiral grooves. The piston rings with different structures undertake different functions, such as sealing the cylinder, conducting heat, lubricating, etc.
Contact Person: Mrs. Amy
Tel: +8615018713561
Fax: 86-577-65987379
