|
Product Details:
|
| Package: | Cartons | Car Make: | Hino |
|---|---|---|---|
| Oem No.: | K13C | DIA.: | 135.0mm |
| Thickness:: | 135.0mm 3.306+3.5+3.5+5 | No.cyl: | 6 |
| Type: | PISTON RING | Size: | Standard Size |
| Highlight: | Scratch Resistance Piston Ring Set,K13C Piston Ring Set |
||
Scratch-Resistance Piston Ring For Hino K13C 135.0mm 3.306+3.5+3.5+5
| Model | Scratch-Resistance Piston Ring For Hino K13C 135.0mm 3.306+3.5+3.5+5 |
| DIA. | 135.0mm |
| SIZE | 3.306+3.5+3.5+5 |
| Application | PISTON RING |
| Quality | ISO 9001:2008 ISO/TS16949 standard |
| Precision | 0.018mm |
| Service | OEM available |
Product Characteristics
Product Feature
The piston ring is usually made of high-strength alloy steel or cast iron, which has excellent strength and wear resistance. This allows the piston rings to withstand working conditions under high pressure and high temperature, while maintaining a long service life.
Basis Introduction
A piston ring usually consists of two or three rings, including an upper ring, a middle ring, and a lower ring. Each ring has different functions and characteristics. The upper ring is mainly used to seal the combustion chamber, the middle ring is used to assist in sealing and controlling the oil film, and the lower ring is mainly used to seal the combustion chamber and control the oil film.
The piston ring reduces the frictional resistance when in contact with the cylinder wall by using low friction materials and surface treatment technology. This not only improves the engine's output power and fuel economy, but also reduces the generation of noise and vibration, enhancing driving comfort
Clean the piston groove:
Use tools such as a scraper to clean carbon deposits and dirt from the piston groove.
Gently grind the surface of the piston groove with sandpaper or a grinding tool to ensure a smooth surface.
Install new piston rings:
Before installation, ensure that the new piston ring matches the piston and carefully check its condition.
Use piston ring pliers to carefully place the piston ring into the piston groove, ensuring that the opening of the ring is correctly aligned.
Lubrication and assembly:
Apply a small layer of lubricating oil between the piston ring and piston groove to reduce friction and promote sealing effect.
Reinstall the piston onto the connecting rod and connect other engine components in the correct order.
The product principles of piston rings include sealing principle, lubrication principle, guiding principle, heat dissipation principle, and the function of preventing impurities from entering. These principles together ensure the efficient operation, reliability, and durability of the engine and compressor. By optimizing the design and manufacturing process of piston rings, the performance and lifespan of products can be improved.
The piston ring also has the function of guiding the piston to move on the cylinder wall, ensuring the stability and accuracy of the piston. Through close contact with the cylinder wall, the piston ring limits the axial and radial displacement of the piston, preventing it from deviating from its normal motion trajectory.
The piston rings also perform lubrication functions. During operation, a small lubricating oil film is formed between the piston ring and the cylinder wall to reduce friction and wear. This helps to reduce energy consumption, extend piston ring life, and improve the efficiency of the engine or compressor
The piston ring is used to seal the gap between the piston and the cylinder block to prevent leakage of lubricating oil and combustion chamber gas. High quality piston rings can provide excellent sealing performance, ensuring the normal operation of the engine or compressor, and minimizing energy loss and environmental pollution
The piston ring is generally composed of several rings, closely connected on both sides. Common structures include oil rings, oil control rings, and upper and lower spiral grooves. The piston rings with different structures undertake different functions, such as sealing the cylinder, conducting heat, lubricating, etc.
Contact Person: Mrs. Amy
Tel: +8615018713561
Fax: 86-577-65987379
